Custom Audio Electronics KPM302III, User Manual

Page: 96 / 188

6.7 Operation parameters
The parameters marked with the symbol D are the default values.
Settings remain active even after the device has been turned of and they are stored in non-volatile memory.
PRINTER EMULATION
Available emulations for the device.
SVELTA D
CUSTOM POS
PRINT MODE
Printing mode.
Normal D = enables printing in normal writing way
Reverse = enables printing rotated 180 degrees
AUTOFEED
Setting of the Carriage Return character:
CR disabled D = Carriage Return disabled
CR enabled = Carriage Return enabled
The parameter is printed on setup report only if the parameter "Printer emulation" is set
on "CUSTOM POS".
CHARS / INCH Font selection (CPI = Characters Per Inch):
KPM302III, KPM302III EJ, KPM302III vSEL
KPM302III TF, KPM302III TF-EJ, KPM302III TF-vSEL, KPM302III TF-hSEL
TK302III, TK302III TF
A = 11 cpi, B = 15 cpi
A = 15 cpi, B = 20 cpi
D
A = 20 cpi, B = 25 cpi
KPM303III, KPM303III EJ, KPM303III vSEL, TK303III
A = 16 cpi, B = 23 cpi
A = 23 cpi, B = 30 cpii
D
A = 30 cpi, B = 27 cpi
The parameter is printed on setup report only if the parameter "Printer emulation" is set
on "CUSTOM POS".
SPEED / QUALITY Setting of printing speed and printing quality:
High Quality
Normal
High Speed
D
96