Custom Audio Electronics 915DW011000300, User Manual

Page: 80 / 84

10.3 Alignment parameters
The “alignment point” is deined as the position inside the ticket to use for the black mark alignment.
The distance between the black mark edge and the alignment point is deined as “Notch Distance”.
“Notch/Distance” value varies from 0mm minimum and 32mm maximum.
If the “Notch Distance” value is set to 0, the alignment point is set at the beginning of the black mark.
PRINTING DIRECTION
Alignment
point:
notch front
0
“Notch Distance”
Alignment
point
80