Cushman TURF-TRUCKSTER, Service & Repair Manual

Page: 59 / 263

3. After installing release shaft/fork bushings, caulk
transmission case against bushings at two points.
4. Position the return spring (see Figure 4D-3) on
the clutch release shaft/fork.
5. Install the clutch release shaft/fork in the bush-
ings. Install the clutch release lever on the
shaft/fork as shown in Figure 4D-8, aligning the
two punch marks on the release arm with the
shaft/fork.
6. Hook the return spring (Figure 4D-3) onto the
clutch release lever.
7. Install the clutch release bearing on the transmis-
sion input shaft retainer.
8. Refer to Figure 4D-9, use a flywheel holder tool to
hold the engine flywheel. Use a clutch center
guide tool to install the disc and clutch cover to
the flywheel. Secure with six cover bolts. Torque
bolts to 13.5 to 20 ft-lbs. (18 to 25 N.m). Remove
the center guide tool.
CLUTCH ADJUSTMENTS
After repair of the clutch and/or removal of the engine
or transmission, adjust clutch pedal free travel, clutch
cable and interlock switch as described in Section 2C.
DRIVE TRAIN
SECTION 4D. CLUTCH
4D-4
Figure 4D-8. Clutch Release Lever Installation
Figure 4D-9. Clutch Cover and Disc Installation