5 - 7
MAINTENANCE
Read all of this manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notices, Cautions, Warnings, and Dangers.
5
Wheel Installation
To reduce the possibility of component damage, do not tighten lug nuts to more than 85 ft. lbs. (115 Nm) torque.
It is important to follow the ‘cross sequence’ pattern when installing lug nuts. This will assure even seating of the wheel against
the hub.
With the valve stem to the outside, mount the wheel onto
the hub with lug nuts. Finger tighten the lug nuts (1) in a
‘cross sequence’ pattern. Tighten the lug nuts to 50 to 85
ft. lbs. (68 to 115 Nm) torque in 20 ft. lbs. (27 Nm) incre-
ments following the ‘cross sequence’ pattern.
LIGHT BULB REPLACEMENT
To reduce the possibility of premature bulb failure, do not touch new bulbs with bare fingers. Use clean, dry tissue or
paper towel to handle the glass portion of the bulb.
Headlight and Front Turn Signal
For vehicles equipped with lights mounted in the cowl,
locate bulb socket on backside of light and turn bulb socket
a quarter turn counterclockwise to unlock and pull out bulb
and socket. Insert new bulb and rotate socket a quarter
turn clockwise to secure.
Similarly replace the turn signal light bulb, locate bulb
socket on backside of light bar and turn bulb socket a quar-
ter turn counterclockwise to unlock and pull out bulb and
socket. Insert new bulb and rotate socket a quarter turn
clockwise to secure.
NOTICE
Tire/wheel style
may vary
1
2
3
4
'Cross Sequence'
'Cross Sequence'
1
2
5
3
4
Inside
of Cowl
Headlight
Bulb
