Curtiss-Wright | PG Drives Technology
SK81935-01
36 | R-net Omni2 Technical Manual | Chapter 2 – Operation
9
LIGHTING CONTROL MODE
While in Lighting Control Mode, a screen as below will appear. Forward and Reverse SID commands will select each lighting
function. A Left or Right SID command will switch on the function. Another Left or Right SID command will switch the function
off.
An operation of the User Switch or a Right SID command while Exit is highlighted exits to the point set by the parameter,
Return To. For further details of this parameter, refer to the Return To section in the Programming chapter.
If User Control is set to Sequence, then selecting the Exit option will sequence to the next available menu entry.
10
LATCHED OPERATION
The latched operation parameters are now contained within the standard R-net programming, rather than in the Omni.
Within the standard R-net programming, the relevant parameters are: Latched Drive, Latched Actuators, Latched Timeout and
Latched Timeout Beep. Refer to the R-net Technical Manual SK77981 – Programming for further details of these parameters
and latched operation.
11
LCD SCREEN DETAILS
Some of the information in this section will have been covered earlier, however, the following provides a complete
description of all the LCD screen graphics.
The screen is split into four areas of information: Battery Indicator, Information Bar, Main Area and Text Bar. Each area is
detailed separately in the following sections.