Curtiss-Wright FHA5-XE1MWB04-00 User Manual Download Page 69

Page: 69 / 81

APPENDIX C

9-3

SL240 XMC User Guide

9.1 Ordering Information

This appendix contains the order numbers for Curtiss-Wright products mentioned in this manual.

For an up to date list, or for inquiries about these products, contact Curtiss-Wright Defense

Solutions Center Sales.

9.1.1 SL240 PCIe Multi-channel Board

Table C-1 SL240 XMC Multi-channel Air-cooled

Order Number

Description

FHA5-XE1MWB04-00 SL-100 XMC PCIe, x8 form-factor with one SFP optical transceiver.

signaling voltage3.3 V PCI, Air-cooled.

FHA5-XE2MWB04-00 SL-100 XMC PCIe, x8 form-factor with two SFP optical transceivers.

signaling voltage3.3 V PCI, Air-cooled.

FHA5-XE4MWB04-00 SL-100 XMC PCIe, x8 form-factor with four SFP optical transceivers. signaling

voltage3.3 V PCI, Air-cooled.

FHA7-XE1MWB04-00 SL-240 XMC PCIe, x8 form-factor with one SFP optical transceiver.

signaling voltage3.3 V PCI, Air-cooled.

FHA7-XE2MWB04-00 SL-240 XMC PCIe, x8 form-factor with two SFP optical transceivers.

signaling voltage3.3 V PCI, Air-cooled.

FHA7-XE4MWB04-00 SL-240 XMC PCIe, x8 form-factor with four SFP optical transceivers. signaling

voltage3.3 V PCI, Air-cooled.

Table C-2 SL100/SL240 XMC Multi-channel Conduction-cooled

Order Number

Description

SL100

FHB5-XE1MWB04-CC SL100 XMC 1.0625 Gbs Data Link Card, Single Channel, Bi-

Directional, 3.3v, 850nm, LC Connector, Conduction Cooled.

FHB5-XE2MWB04-CC SL100 XMC 1.0625 Gbs Data Link Card, Dual Channel, Bi-Directional,

3.3v, 850nm, LC Connector, Conduction Cooled.

FHB5-XE4MWB04-CC SL100 XMC 1.0625 Gbs Data Link Card, Quad Channel, Bi-

Directional, 3.3v, 850nm, LC Connector, Conduction Cooled.

FHB7-XE4P6B04-CC SL100 XMC 1.0625 Gbs Data Link Card, Quad Channel, Bi-

Directional, 3.3v, Rear IO, Conduction Cooled.

SL240

FHB7-XE1MWB04-CC SL240 XMC 2.5 Gbs Data Link Card, Single Channel, Bi-Directional,

3.3v, 850nm, LC Connector, Conduction Cooled.

FHB7-XE2MWB04-CC SL240 XMC 2.5 Gbs Data Link Card, Dual Channel, Bi-Directional,

3.3v, 850nm, LC Connector, Conduction Cooled.

FHB7-XE4MWB04-CC SL240 XMC 2.5 Gbs Data Link Card, Quad Channel, Bi-Directional,

3.3v, 850nm, LC Connector, Conduction Cooled.

Summary of Contents for FHA5-XE1MWB04-00
















































































Search results

Summary of Contents for FHA5-XE1MWB04-00

Reviews:

Related manuals for FHA5-XE1MWB04-00

Brands by name

Popular brands

Curtiss-Wright FHA5-XE1MWB04-00, User Manual

Search results

Summary of Contents for FHA5-XE1MWB04-00

Reviews:

Related manuals for FHA5-XE1MWB04-00

Brands by name

Popular brands