Curtiss-Wright CNS4 CSfC, User Manual

Page: 37 / 141

User Guide DDOC0108-000-A2
CNS4 CSfC 5 - 8 Quick Start
Revision 1.0
--- Device Partitions ---
NAS on partition 0 1 2 3
[!sysconfig] OK
Check SWE Status:
cns>
swcrypt
[ swcrypt]
Partitions: 4
Part0: name=fsm0-d01 swe=no
Part1: name=fsm1-d01 swe=no
Part2: name=fsm2-d01 swe=open
Part3: name=fsm3-d01 swe=open
[!swcrypt] OK
2. Repeat paragraph 5.8.0.2 Method 2 step 1 above substituting 3 for 2 to open FSM3.
5.9 Format / Mount NAS Partitions
NOTE
Paragraphs 5.7 and 5.8 created and opened SWE containers for partitions 2 and 3. If desired,
create and open containers on partitions 0 and / or 1 as well.
Command
sysconfig -f all -m all
Example
cns> sysconfig -f all -m all
[sysconfig]
FSM_NAS0: cmd=Formatting status=OK
FSM_NAS1: cmd=Formatting status=OK
FSM_NAS2: cmd=Formatting status=OK
FSM_NAS3: cmd=Formatting status=OK
FSM_NAS0: mounted=1 status=OK
FSM_NAS1: mounted=1 status=OK
FSM_NAS2: mounted=1 status=OK
FSM_NAS3: mounted=1 status=OK
[!sysconfig] OK
Check Status
cns> sysconfig
[sysconfig]
DiskConfig:
Individual_disks: numDisk=4
Disk0: name=fsm0-d0 size=2000GB
Disk1: name=fsm1-d0 size=2000GB
Disk2: name=fsm2-d0 size=2000GB
Disk3: name=fsm3-d0 size=2000GB
Raid_disks: numDisk=0
Raid_volumes: numDisk=0
Partitions: numPartitions=4
Part0: name=fsm0-d0 size=2000246MB pSize=100.00% dp=1 numServ=1
sName=fsm_nas0 fmt=ext4 mnt=1 enb=0 swe=no
Part1: name=fsm1-d0 size=2000244MB pSize=100.00% dp=1 numServ=1
sName=fsm_nas1 fmt=ext4 mnt=1 enb=0 swe=no
Part2: name=fsm2-d0 size=2000244MB pSize=100.00% dp=1 numServ=1
sName=fsm_nas2 fmt=ext4 mnt=1 enb=0 swe=open
Part3: name=fsm3-d0 size=2000244MB pSize=100.00% dp=1 numServ=1
sName=fsm_nas3 fmt=ext4 mnt=1 enb=0 swe=open
--- Device Partitions ---
NAS on partition 0 1 2 3
[!sysconfig] OK