MP2029UK
User Manual
1. Overview
2. Unique Features
3. Play Music
5. External Memory Card
Output DC 5V
Shorted and Touch
GND
Empty
1. Elegant appearance with LED indicator and card slot.
2. Multi-Code Player - Supporting MP1, MP2, MP3, WMA formats.
3. Drive Free U Disk - You may manage your files directly through “Portable
Device” in “My Computer” on Windows 2000 Operating System or above
without driver.
4. Function of LED Indicator Light
1. In Power OFF Mode: No Light.
2. In Music Playing Mode: Light flashing (about once per second).
3. In Music Pause Mode: Light bright.
4. In PC Connection / Charging Mode: Light bright.
5. Charging Complete: Light Off
1. Turn OFF the player and then insert memory card into card slot; make
sure memory card is firmly and correctly inserted.
2. Turn ON the player by press button, the player is reading and
searching the supported music files from memory card / internal memory,
and found music will play automatically.
3. Before taking out / inserting the memory card with player. Please turn
OFF the player.
7. File Transfer
9. Technical Specifications
1. Connect player to PC by USB cable.
2. The device will be detected automatically.
Choose take no action and close the window.
3. Double click My Computer to choose
Removable Disk icon.
4. Drag your media files into the removable disk.
5. Close the removable disk window and
disconnect the player from PC after data transfer.
-
Check to see if battery is low
-
Check to see if the player is ON
-
Check to see Volume is set “0” and connect the
earphone connects properly.
-
Make sure earphone is clean and in good status
-
Damaged MP3 file may make noise and could not
be played. Make sure that the music file are not
damaged.
-
Check to see if USB cable is damaged and
connected properly.
-
Check to see if driver is installed correctly.
-
Check to see if memory space is enough
6. USB Disk
8. Trouble Shooting
1. USB Disk
The player could be use as standard USB disk with operating system of
Windows 2000 and above, Mac OS 10.3 and above, Linux Redhat 8.0
and above (no driver needed) while Windows 98 need to set up driver.
2. Charging
2.1 Make sure the power switch is on to charge, or the player could not
be charged properly. The LED light is on when the player is charging, the
light will be off when the battery is full.
2.2 Disconnect the player and charger if you want to stop charging.
2.3 Turn off the player when you do not use player.
3. Remarks (Additional information for Adaptor purchase)
3.1 The adaptor must be conformed to following standard
3.1.1 Input: 100V ~ 240V, 50/60Hz
3.1.2 Output: 5.2V ± 0.2V
3.1.3 Max.: 350mA
3.1.4 4 pins adaptor
Connect the earphone to player
1. Press and hold button for 2-3 seconds to switch ON
1.1 Select music
: To select previous music
: To select next music
2. To adjust the volume
2.1 Press / to adjust volume
3. To change normal / shuffle play
3.1 Press and hold “V+ /S” button for 2-3 seconds to enter “Random”
play mode and the LED light will flashing slow about once per 2 seconds.
3.2 Press and hold “V+ /S” button for 2-3 seconds again to return to
“Normal” play mode and the LED light will flashing about once per 1
seconds.
V /S V
No Power
2GB
Capacity
NA
Display
USB 2.0 High Speed
Interface
Up to 4hrs
Max Playtime
Li-Polymer Rechargeable (3.7V) 230mAh
Battery Type & Capacity
MP1, MP2, MP3, WMA
File Type
85 ~ 95 db
S/N Ratio
(L) 5mW + (R) 5mW (32Ohm)
Power Output
Compatible with Windows 2000 / XP
Operating System
35 x 90 x 13.8 mm
Dimensions
40g
Weight
No Sound from earphone
Failure of music download
MICRO SD
CARD SLOT
BACKWARD
FORWARD
/ SHUFFLE
USB PORT
EARPHONE
JACK / RESET
POWER
ON
/
OFF
PLAY / PAUSE
OR
VOLUME -
LED INDICATOR
SPEAKER
V /S
V
