INSTALLATION INSTRUCTIONS
II9
(5)&3.0130*/45"--"5*0/*/4536$5*0/4ø
082019C
Connection to an Electrical Outlet
18 If not already installed, install the appropriate type of
power plug for your locality. Consult local electrical
codes to determine the approved type of power plug
for your region.
19 Connect the power plug to the appropriate electrical
outlet.
Powering up the Unit
20 Turn on the water supply valve.
21 Make sure that the circuit breaker supplying power to
the unit is on.
22 Turn the toggle switch on the back of the brewer to the
0/QPTJUJPO5IFXBUFSUBOLXJMMTUBSUUPmMM8IJMFUIF
UBOLJTmMMJOHJOTQFDUUIFXBUFSTVQQMZMJOFGPSMFBLT(P
to the
PROGRAMMING GUIDE
section and program
the brewer for the correct model and batch number.
23
8IFOUIFXBUFSMFWFMJOUIFUBOLSJTFTUPUIFDPSSFDU
volume, the heating elements will turn on automatically.
Depending on the incoming water temperature and
UIFFMFDUSJDBMTQFDJmDBUJPOTUIFXBUFSUBOLUZQJDBMMZ
requires 20 to 30 minutes to reach the factory set
PQFSBUJOHUFNQFSBUVSF8IFOUIFXBUFSIBTIFBUFE
“Ready to Brew” should be on the display.
24
#FGPSFCSFXJOHGPSUIFmSTUUJNFEJTQFOTFP[NM
of hot water through the hot water faucet to help purge
air from the tubing inside the brewer.
25
#SFXBDZDMFPGBUMFBTUP[NMUPQVSHFBOZ
remaining air from the tubing. See
OPERATING
INSTRUCTIONS
. During the initial brew cycle and
XIFOFWFSUIFmMUFSJTSFQMBDFEZPVNBZIFBSUIF
TPVOETPGBJSCFJOHQVSHFEGSPNUIFmMUFSUVCJOHBOE
water tank.
Back of brewer
5HTXLUHGSOXJVW\OH
YDULHVZLWKFLUFXLW
UHTXLUHPHQWV
IMPORTANT:
8IFOPQFSBUJOHUIFVOJUBUIJHIFS
elevations, reduce the default operating
UFNQFSBUVSF ¡'¡$CZ¡'¡$GPSFBDI
1000 feet (300 m) of elevation above 4000 feet
(1200 m). See
PROGRAMMING GUIDE
.
WARNING:
Connect the power cord only to the
BQQSPQSJBUFUZQFBOETJ[FFMFDUSJDBMPVUMFU*GJUJTOPU
compatible, either have the cord replaced or have
the electrical outlet upgraded by a licensed
electrician. Do not use an extension cord. Do not
VTFBQPXFSDPSEQMVHUIBUJTEBNBHFE
