background image

The  easy  to  install  WS  series  In-Wall  speakers  are  a  full  range  
loudspeaker  that  incorporates    high  tech  woofer  materials  with  a  butyl 
rubber  surround  and  a  state-of  the-art  pivoting  dome  Ferrofluid  cooled 
tweeter. The pivoting tweeter allows for deeper penetration into the room 
and concentrated sound to the sweet spot or your favored location. 
This revolutionary combination provides superior and more natural sound 
for both foreground and background applications. 
This design is a great choice for stereo and surround sound applications. 
For 3-D audio our LCR series is a more accurate choice. 
  
For  efficiency  and  consistency  the  WS  series  speakers  are  timbre 
matched to the FIT series, LCR and CS series of speakers. 
In  addition,  most  of  the  WS  speakers  incorporate  a  3  position 
equalization  switch,  one  each  for  bass  and  treble  to  fine  tune  the 
acoustics and allow for various room surfaces. 
 
The  speaker  grille  color  is  white,  and  is  a  close  match  to  Frazee  White 
Shadow  181.  It  can  be  painted  to  match  any  décor.  The  speaker 
enclosure  is  a  durable  UV-resistant  material  that  allows  for  both  indoor 
and  outdoor  installations.  Unlike  other  grilles  that  use  magnets  to  hold 
them on they must be made of steel that will rust. The perforated powder-
coated  aluminum  alloy  grill  is  long-lasting,  corrosion  resistant  and  rust-
free.  
 
Six  built-in  expanding  transverse  dog  leg  clamps  permit  installation  with 
or  without  pre-wire  construction  brackets  in  drywall  or  material  with 
thickness of 7/32

” to 1 3/16”. 

 
Electrical  connection,  up  to  12  gauge  wire,  is  made  by  two  gold  plated  
constant tension spring-loaded terminals. 
 
With  our  limited  5  year  warranty  you  are  assured  years  of  superior 
trouble free operation. 

Low Profile, In-Wall, Coaxial,  Infinite Baffle 
Loudspeaker with Easy Install Grille 

WS Series Ceiling Speaker   

User’s Installation Guide

 

www.currentaudio.com 

©2009 Current Audio LLC  

1830 John Towers Avenue  El Cajon, CA 92020   Sales 866-927-7181 

 

 

SPECIFICATIONS for WS65 Series 

WS650 

WS651 

WSS654 

Driver with Butyl Rubber Surround 

MetaPlex Composite 

Injection Molder Carbon Fiber 

Woven Carbon Fiber 

Tweeter, 

1“(25mm), Pivoting Dome 

Silk Ferrofluid Cooled 

Aluminum Ferrofluid Cooled 

Ceramic Coated Aluminum 

Ferrofluid  Cooled 

Frequency Response 

42Hz-20kHz 

40Hz-20kHz 

35Hz-21kHz 

Power handling 

5-100 Watts 

5-125 Watts 

5-150Watts 

SPL @ 1 Watt/1 meter 

90db 

90db 

91.5db 

Impedance 8 ohm Nominal 

Fixed Crossovers 

3 Position Crossovers  

3 Position Crossovers 

Length x Width x Depth 

12 1/4”(311mm)x8 3/16”(208mm)x3 

1/16”(168mm)  

12 1/4”(311mm)x8 

3/16”(208mm)x3 1/16”(168mm)  

12 1/4”(311mm)x8 

3/16”(208mm)x3 1/16”(168mm)  

Retro-fit Cutout Length x Depth 

10 11/16”(272mm)x6 5/8”(168mm)   10 11/16”(272mm)x6 5/8”(168mm  

10 11/16”(272mm)x6 

5/8”(168mm  

Part Number 

 92025 WS650; 92024 WS651;92018 WS654; 

 

 92098 WS800; 92099 WS801;92023 WS804: 

 

 92070 R70VT 70Volt Xrmr 

 
 
Manual URL 

www.currentaudio.com 

 
Accessories 

NC6WB; NC8WB   

 

New Construction Bracket 

 

Volume Control  ZL45R, ZL60S, SpeKap 

Specifications subject to change without notice. 

WS Series 1110  RPA 

WS804 

Summary of Contents for WS650

Page 1: ...r without pre wire construction brackets in drywall or material with thickness of 7 32 to 1 3 16 Electrical connection up to 12 gauge wire is made by two gold plated constant tension spring loaded terminals With our limited 5 year warranty you are assured years of superior trouble free operation Low Profile In Wall Coaxial Infinite Baffle Loudspeaker with Easy Install Grille WS Series Ceiling Spea...

Page 2: ... to attach the 2 conductor wire to the gold plated constant tension spring loaded terminals Remove about 2 of the outer jacket then strip about insulation from each wire and slightly twist the strands to ensure all strands can be inserted into the hole Refer to next picture for location of the gold plated constant tension spring loaded terminals Push down on the RED colored Terminal and insert the...

Page 3: ...ontour Switch adjustments before installing grille The Bass and Treble switches on the Tweeter Bridge as shown in section 4 allows for contour adjustment Moving the switch to increases the Bass or Treble 3db and to reduces it by 3db In the O setting you achieve a flat frequency response NOTE If you have blown in insulation and or a potential rodent problem I suggest you install the SpeKap It is a ...

Page 4: ...iginal consumer which includes but not limited to improper installation negligence unauthorized repair or modification aesthetic deterioration from the environment Products purchased by unauthorized sources will void the warranty and not be honored Current Audio LLC is not liable for any incidental or consequential damages so the above limitations or inclusion may not apply to you This warranty gi...

Reviews: