2721
.
Optional Accessories
(Sold Seperately)
2723 EzyStand, 3501 ActiveCare Pager,
2700 Six Channel Cordless Falls Monitor, 3500
ActiveCare Console, 2544 Cordless Multiport Expander,
2544 Cordless Multiport Expander Bracket Mount,
2404 Plug Pack
The 2721 iBeam has a narrow detection beam
which detects movement up to 3m away, and a
wireless range of approx. 30m*. Use in
bedrooms, doorways, near stairs etc.
The narrow beam is especially useful if you
have other people in the same room who do
not require movement detection or where only
a very specific area requires monitoring.
*The range of wireless devices may vary and be dependent on your
specific environmental conditions.
Optional 2723 EzyStand
Tightening Nut
Cable Clips
Height
Adjustment
Lock
Magnet
2404 AC Adapter
(Optional)
Back View
2721 iBeam
Screws
(supplied)
Double
sided tape
(supplied)
Mounting hardware
Mounting tape and
screws are supplied if
you wish to
permanently mount
the iBeam to a fixture.
iBeam Bracket
Front View
ON OFF Switch
LED illuminates
green when
motion detected.
iBeam curtain
window.
Antenna.
Extend fully
when in use.
Side View
Adjustable tilt can
be used when the
iBeam is located on
the ground or up
high.
1. Rotate the
iBeam in it’s
bracket 90 degrees
so that it is facing
the ceiling.
2. Apply gentle
pressure to one
arm of the
bracket so that
the iBeam can
easily pop out.
If you use screws to fix the iBeam bracket to a permanent
position, you will need to separate the iBeam and bracket
before you screw the bracket to a fixture.
To easily separate the iBeam from it’s bracket:
Detatching the iBeam from it’s mounting bracket
UM-028c
