manualshive.com logo in svg

CUMMINS ALLISON JetScan, Operating Manual

The Cummins Allison JetScan Operating Manual is a comprehensive guide for effectively utilizing this advanced currency scanning and coin counting product. Gain valuable insights and ensure smooth operation by downloading this user manual for free from our website. Maximize utilization of your JetScan - visit manualshive.com for hassle-free manual downloads.

Share
Download
background image

14

JetScan

®

S T O P P I N G   C O N D I T I O N S

  

  

    

15

JetScan

®

S T O P P I N G   C O N D I T I O N S

  

  

    

D    I    S    P    L    A   Y

JetScan sensors have detected a possible 

counterfeit note. JetScan has stopped  

with this note as the top note in the pocket 

indicated on the screen. This note has not 

been included in the count.

Inspect the top note in the pocket  

indicated on the screen.
If it is identified as a counterfeit,  

place it aside and press 

CONT

.  

It will not be part of the count.
If the note is determined to be good, return it to the pocket indicated  

on the screen and press the appropriate 

denomination value key

.  

JetScan will re-start, and this note will be added to the count.

  

  

• Incorrect-ink error 

 

• Worn note

 

  

• Incorrect note paper 

 

• Soiled note

 

• Incorrect note paper 

   

• Machine-washed note  

 

 

• Taped note

Code

Possible Causes

M 

UV 

FL

This could show different suspect-document 

codes. For details, refer to the code chart. 

Only on Select Models

This could show different suspect-document 

codes. For details, refer to the code chart. 

Inspect the top note in the pocket  

indicated on the screen.
If it is identified as a counterfeit,  

place it aside and press 

CONT

.  

It will not be part of the count.
If the note is determined to be good, return it to the pocket indicated on the 

screen and press the appropriate 

denomination value key

. JetScan 

will re-start, and this note will be added to the count.

D    I    S    P    L    A   Y

JetScan sensors have detected a possible 

counterfeit note. JetScan has stopped 

with this note as the top note in the 

pocket indicated on the screen. This note 

has not been included in the count.

Higher probability of a 

super note

Lower probability of a super note, but commonly  

identifies poor-quality counterfeit notes

S1

S3

S2

S5

S8

S10

S11

• Incorrect note paper

• Soiled note

• Incorrect note paper 

• Machine-washed note

• Taped note 

• Incorrect note paper 

• Soiled note

• Incorrect-ink error 

• Worn note

Code

Code

Possible Causes

Possible Causes

• Note failed advanced  

  counterfeit test 

• Worn note

• Incorrect-ink error 

• Genuine AK Series $100  

• Worn note

• Incorrect-ink error

• Worn note

S1

S2

S3

S5

S8*

S10*

S11*

*  These error codes are most common among super  

  notes, which are high-quality counterfeits. Notes 

  producing these codes should be carefully examined.

Only on Select Models

Summary of Contents for JetScan











Reviews:

No comments

Related manuals for JetScan

ICT Bill Validator S7 Series Installation Manual preview
Bill Validator S7 Series
Brand: ICT Pages: 7
RAYLASE SUPERSCAN II Manual preview
SUPERSCAN II
Brand: RAYLASE Pages: 26

Brands by name

Popular brands

Load more brands