manualshive.com logo in svg

CUMMINS ALLISON JetScan MPX 8200, User Manual

Share
Download
CUMMINS ALLISON JetScan MPX 8200 User Manual Download Page 22

22 |

 JetScan

®

 MPX 8200 strapping and corner module

  |  Daily cleaning procedures

Daily cleaning procedures

See the JetScan MPX 8200 user guide for additional cleaning procedures.

Daily cleaning is required to ensure maximum productivity and reliability. In some 
instances, it may be necessary to perform these procedures more than once a day.

Recommended cleaning materials

The following cleaning materials are recommended:

Simple Green, the recommended cleaning agent, can be an eye 
irritant. Avoid eye contact.

If eye contact occurs, flush eye(s) with cool water for 5 minutes 

– remove contact lenses if present – continue flushing eye(s) 

with cool water for 15 more minutes. If irritation persists, consult 

physician.
Individuals with sensitive skin should rinse hands after using.

• Simple Green Safety Towels.

 (Part number: 022-2118-00.) A pre-moistened 

microfiber towel also may be used. If using Simple Green concentrate, 
dilute to 1 ounce (30 ml) of Simple Green per 8 ounces (240 ml) of water. 

See simplegreen.com for safety data sheets.

• Microfiber towels.

 (Part number: 022-2223-00.)

• Non-chemically treated mini dusters.

 (Part number: 022-2224-00.)

• Vacuum.

 (Standard vacuum part number: 022-1959-00; heavy-duty vacuum part 

number: 022-1308-00.)

Daily cleaning procedures

Risk of injury.
Press MPX 8200 master power switch 

OFF

 before cleaning any 

automatic-strapping module and any corner module. 
Do not defeat safety interlock switches.

To avoid machine/component damage and potential voiding of 
existing warranty, follow these procedures:

Only use specified tools for cleaning machine. Never use metal 

tools. 
If using Simple Green concentrate, dilute to 1 ounce (30 ml) of 

Simple Green per 8 ounces (240 ml) of water.
Never use cleaners containing ammonia.  
Never spray cleaners directly on machine components.

Summary of Contents for JetScan MPX 8200





























Reviews:

No comments

Brands by name

Popular brands

Load more brands