© 2013 Cummins-Allison Corp.
49
The ADD Key and Sub-Batches
A sub-batch is a deposit processed from one or several sources and treated as sub-groups within
a batch. This memory level tracks documents within a sub-batch.
To accumulate sub-batches, ensure SBAT ENABLE is
ON
in
SETUP
and
ADD
is selected on
the main screen.
To end the batch when processing is complete, remove documents from the pocket and press
END
twice: once to end the sub-batch and once to end the batch.
An example of a
SORT
mode main screen is shown below. The
ADD key
is
ON
, and SBAT
ENABLE is
ON
in
SETUP
.
Facing Documents
To face documents, select
SORT
and
FACE
on the
MODE-SELECTION
screen. Make certain
the bottom document in the stack is faced in the direction desired for all documents. The
machine uses the bottom document as a reference and stops on all documents faced in the
opposite direction.
Place documents in the hopper. The machine begins processing. It stops each time it finds a
document that is faced improperly, and the screen reads “FACING ERROR DETECTED.” To
resume processing, do one of the following:
•
Properly face the top document in the pocket and press
ACCEPT
. The document is
added to the total.
•
Properly face the top document in the pocket, return it to the hopper, and press
REJECT
.
The document is not added to the total.
Summary of Contents for JetScan iFX i100
Page 1: ...JetScan iFX i100 Scanner Operating Instructions for All Models ...
Page 121: ......
