JetCount
®
Currency Counter
All Models
24
Special Mode Menu
JetCount offers special modes for trained personnel. These modes include SET UP, DEFAULT and
DIAGNOSTICS.
Entering the Special Modes Menu
To enter the
Special Modes Menu
, hold down
KEY 15
for 3-5 seconds. The following screen
will appear:
Strap
Density
Denomination
1) USER SET UP: press KEY 3
next selection: press KEY 5
Count
Speed
Press
KEY 3
to enter the Setup Fields.
(See
Press
KEY 5
to proceed to the next Special Mode option:
Strap
Density
Denomination
2) DEFAULT: press KEY 3
next selection: press KEY 5
Count
Speed
Press
KEY 3
to set the selected default mode as the current operating system.
All Setup Fields will revert to the Factory default settings or the User settings defined in USER
SET UP. Select Default Type in USER SET UP to select the desired Default.
Press
KEY 5
for the following prompt to proceed to the next Special Mode:
Both external ports ARE NOT compatible with phones or network connections,
including Ethernet devices.
Never plug a phone or network connection, including Ethernet devices, into
either external port. Equipment damage may occur.
These special modes only should be accessed by trained personnel. Incorrect use
can negatively impact operation of the JetCount.
