JetCount
®
Currency Counter
All Models
12
multiplier to each note counted. You may use the
VALUE key
to toggle to the desired
denomination, or press the
Direct Access Denomination key
. The display will indicate the
denomination selected
.
Memory Levels
JetCount has two memory levels:
Memory Level
Description
STRAP
Strap Limits can be set at any number between 1-100 and infinity. JetCount
stops when reaching the Strap Limit.
BATCH
Batch tracks all documents processed when the ADD key is activated, until
cleared.
Setting Strap Limits
JetCount allows you to set individual Strap Limits. For machines with
Direct Access
Strapping keys
, pre-set Strap Limit Values are set for each key in Setup. Straps may be set for
any piece count between 1 and 100. There are eight preset strap levels: 5, 10, 20, 25, 50, 75, 100
and infinity. Repeatedly pressing
STRAP
allows you to select among the eight values. The
following screen shows the strap set to“50” in COUNT mode.
Strap
Density
Denomination
50 * * COUNT
0 * *
Count
Speed
To select a Strap Limit between 1 and 100 that is not a preset quantity (e.g., “30”), press and
hold
STRAP
until the display shows the preset level nearest and below the desired number. If
you continue to hold down
STRAP
, the value will increase in single-digit increments until you
reach the desired level.
