8
EXPERT WW rev.12
EXPERT WW
3.2. Parameter Adjustment
Use the navigation buttons to select the
desired parameter on the main screen. A
parameter that can be modified blinks when
it is selected; non-blinking parameters cannot
be changed.
3.3. Language Selection
The user interface of the controller can be
displayed in multiple languages. Follow these
steps to change the language selection:
1. Select:
Main menu
More [Otros]
Español [English]
User Settings
Monitoring
Program
Selection
Setup
Time/Date
Español
Use to navigate
2. The controller automatically changes the
language display.
Press and hold the main menu button
for 5 seconds to switch the language
selection.
3.4. LED Meaning
LED
MEANING
ALARM
Solid LED:
"An alarm condition is active.
A corrective action is required."
Flashing LED:
"An alarm condition occurred
but no longer exists. "
CLEAN MODE
Solid LED:
Clean mode is active.
LIGHTS
Solid LED:
Lights are ON.
TUNNEL 2
Open
Solid LED:
tunnel door #2 is opening.
Close
Solid LED:
tunnel door #2 is closing.
TUNNEL 1
Open
Solid LED:
tunnel door #1 is opening.
Close
Solid LED:
tunnel door #1 is closing.
CURTAIN 2
Open
Solid LED:
natural ventilation curtain #2 is opening.
Close
Solid LED:
natural ventilation curtain #2 is closing.
CURTAIN 1
Open
Solid LED:
natural ventilation curtain #1 is opening.
Close
Solid LED:
natural ventilation curtain #1 is closing.
VENT DOOR /
INLET 2
Open
Solid LED:
vent door (inlet) #2 is opening.
Flashing LED:
the controller opens vent door (inlet) #2 to reset
the actuator's position.
Close
Solid LED:
vent door (inlet) #2 is closing
Flashing LED:
the controller closes vent door (inlet) #2 to
reset the actuator's position.
VENT DOOR /
INLET 1
Open
Solid LED:
vent door (inlet) #1 is opening.
Flashing LED:
the controller opens vent door (inlet) #1 to reset
the actuator's position.
Close
Solid LED:
vent door (inlet) #1 is closing
Flashing LED:
the controller closes vent door (inlet) #1 to
reset the actuator's position.
STAGES 1-12
Solid LED:
fan stage #x is active.
MINIMUM
VENTILATION
Solid LED:
On Time of the minimum ventilation timer.
Flashing LED:
Off Time of the minimum ventilation timer.
HEATERS 1-4
Solid LED:
Heating output #x is active (if Hi Fire option is
not used) or the Hi and Lo fire steps are ON.
Flashing LED:
the Hi or Lo fire heating step is on
MISTING
Solid LED:
the misting output is active.
COOL CELL
Solid LED:
the cool cell output is active.
0-10V OUTPUT
Solid LED:
0-10V output #1 is active.
CLOCK 1-2
Solid LED:
clock output #x is active.
