Cumberland 074-11772, Owner'S Manual

Page: 89 / 102

L
Packaging characteristics
The following directives were followed during the packaging process
2011/65/EU The RoHS 2 directive
2012/19/EU The WEEE 2 directive
1907/2006/EU The REACH regulation
2006/66/EC The battery directive
94/62/EC
Packaging and packaging waste directive
97/129/EC Packaging material identification directive
Packaging is only in cardboard to respect international standards about environment standards:
EN 13428 Packaging - Requirements specific to manufacturing
and composition - Prevention by source reduction
EN 13429 Packaging - Reuse
EN 13430 Packaging - Requirements for packaging recoverable
by material recycling
EN 13431 13431 Packaging - Requirements for packaging recov-
erable in the form of energy recovery, including specifi-
cation of minimum inferior calorific value
EN 13432 Packaging - Requirements for packaging recoverable
through composting and biodegradation - Test scheme
and evaluation criteria for the final acceptance of
packaging
Packaging was tested under ISTA 3A (Packaged Products for Parcel Delivery System Shipment weighing
150 lbs or less – is a test used for simulating courier companies shipping environments).
Shipping, packaging and Lithium battery: packaging shall be capable of withstanding a 1.2 m drop test in
any orientation without damage to cells or batteries contained therein according to the International Civil
Aviation Organization (ICAO), the International Air Transport Association (IATA), the International Mari-
time Organization (IMO) requirements.
Handling symbols on packaging: the standard is ISO R/780 (Packaging - Pictorial marking for handling of
goods).
891–00577 EDGE Bin Scale 3 Wires LC 89