Culina UBTCC75 User Manual Download Page 20 | Manualshive

Page: 20 / 28

Culina UBTCC75 User Manual Download Page 20

20

o

DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN

OR CRACKED. YOU SHOULD CONTACT THE CUSTOMER CARE

DEPARTMENT IMMEDIATELY.

Cleaning operations must only be carried out

when the hob is cool.

The appliance should be disconnected from your

mains supply before commencing any cleaning

process.

Cleaning the ceramic hob top

Any residues that are left on the hob top surface from cleaning

agents will damage it. You should remove any residues with

warm water mixed with a little washing up liquid.

Abrasive cleaners or sharp objects will damage the hob

surface; you should clean it using warm water mixed with a

little washing up liquid.

You may find it easier to clean some deposits whilst the hob

surface is still warm. However you should take care not to burn

yourself if cleaning the hob surface when it is still warm.

After each use

o

Wipe the appliance over with a damp cloth.

o

Dry the appliance by rubbing the surface with a clean cloth.

Cleaning and maintenance

«
...
18
19
20
21
22
...
»

Summary of Contents for UBTCC75





























Reviews:

No comments