Quick RefeRence Guide
Setup and uSe
2.
Pour your desired amount of water into the
water reservoir, using the water level
indicator located at the side of the
coffeemaker window.
4.
Make sure the filter basket is securely
in place and lid is completely closed.
3.
Insert a permanent gold-tone filter
OR
paper filter into the filter basket holder.
Using the scoop provided, add 1 scoop of
ground coffee per cup. Adjust the amount
to taste and close the lid.
5.
To brew coffee, press the BREW/OFF
button. The digital display will show the
current setting, the Brew/Off blue LED
and brewing icon will flash. Brewing will
begin within 5 seconds. The Brewing
Icon will appear on the digital display.
Fully immerse the charcoal water filter in
cold tap water and soak for 15 minutes
(see complete instructions on page 9 of your
Instruction Booklet). Insert the filter into the
water filter holder. Open the water reservoir and insert
into the unit.
1.
iMPORTAnT!
Do not discard. Read before
operating your new coffeemaker.
Keep for further reference.
These helpful hints are intended
to be a supplement to the Instruction
Booklet. In order to ensure proper operation
and optimum performance, please read the
entire Instruction Booklet.
Please see reverse side for programming instructions.
