Introduction
Thank you for purchasing a Cuddeback Capture IR digital scouting camera.
Capture IR is so easy to use that you may feel you do not need to read this manual.
However, we recommend you spend 5 minutes reading this manual to familiarize
yourself with the not-so-obvious features of the Capture IR. At the very least, read
on how to check your Capture IR.
What You Need
Before you can use your Capture IR, you will need the following items:
1. One or more Secure Digital (SD) cards. We recommend sizes up to 2 GB,
with 1 GB being the preferred size. The higher the number on the card, the
more images that can be saved on the card. DO NOT USE SDHC CARDS.
2. Four D Cell batteries (we recommend Rayovac, Duracell or Energizer
brand batteries).
3. An optional padlock if you want to prevent tampering. The shaft of the padlock
must be ¼ inch or smaller to fit through the Capture IR’s padlock opening.
STEP 1 – Familiarize Yourself with Capture IR
Take a moment to familiarize yourself with Capture IR’s parts.
STEP 2 – Turning Capture IR On
1. Mount the supplied tree bracket to the back of the camera with the supplied screw.
2. Turn the rotary switch to the OFF position.
3. Install 4 new alkaline D cell batteries. Make sure to observe correct polarity.
4. A series of numbers will be displayed. These are the Capture IR’s hardware and
software version numbers.
5. Wait until the LCD display goes blank and the green & red LEDs turn off.
6. Install SD card. We recommend a 1 GB size card.
Non Typical, Inc.
•
860 Park Lane
•
Park Falls, WI 54552
715-762-2260
•
Fx: 715-762-2719
www.
cuddebackdigital
.com
IR
illuminator
Camera
window
SD Card port
Operation keys
LCD screen
Heat-in-motion
sensor
CuddeView
is the ONLY device you need
to view, transfer and delete your
digital scouting camera images.
New from Cuddeback ... the
CuddeView
4
-in-
1
Field Viewer
1.
View images in the field -
Use CuddeView to view your images in the field.
2.
View images on your computer -
CuddeView serves as a PC or laptop card reader
, so you can
download images to your computer (cable included; requires
USB port and Windows XP/Vista operating system).
3.
View images on your TV -
CuddeView comes with a TV cable
so you can see your scouting camera
images on your TV (TV requires RCA
video-in port).
4.
Transfer images -
Eliminate card swapping! Check
each scouting camera and, using
CuddeView, transfer images from
each camera’s CF/SD card to a single,
high-capacity (we recommend 2.0GB)
SD/CF “archive” card.
•
Compatible with CompactFlash and SD cards
•
View, transfer and delete images
•
Built-in rechargeable lithium battery
•
Built-in LED light
Rotary switch
Red LED
Green LED
Hinge rod
1.
Push hinge rod
left to hold open
“Stay-open” cover
2.
Push hinge rod
right to close
2
1
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that
may cause undesired operation.
Rev 1
