Cube Kids Bmx, Handbook

Page: 46 / 52

44 | KIDS BMX | EN
mtb101
S Insert the cable in the yoke.
mtb105mtb106
b) Hydraulic rim brakes:: Fitting is as removal only
in reverse sequence.
S Insert any distance washers in the correct
position and place the brake on the brake
bosses.
mtb096
S Swivel the locking lever so that the brake
is fixed in place again.
mtb097(Peel) mtb098
10. Please ensure that the brake blocks correctly
cover the rim shoulder when operated.
mtb108mtb099
11. On front wheel with hub dynamo (if fitted):
S Refit the push connector between the hub
dynamo and the cable.
12. Check installation:
S Operate the brakes.
S If the brake block or brake touches the
rim or the brake disks this can indicate
incorrect seating of the hub in the
dropouts.
S In that case release the quick release,
check and correct the hub seat and close
the quick release again.
S The brake (on rim brakes) must not be
opened during this procedure. If there is
no improvement after this please contact
your dealer immediately.
S Check that the lighting system (if fitted) is
working.