Cub Cadet ZT1 42E, Operator'S Manual

Page: 20 / 64

20
SERVICE AND MAINTENANCE
WARNING
Before inspecting, cleaning or servicing the tractor, power
off the tractor and remove the key.
Follow the maintenance schedule given below. This chart
describes service guidelines only. Use the Service Log column
to keep track of completed maintenance tasks.
Contact an
authorized service dealer to schedule a service.
IMPORTANT:
Bring the battery charger when arriving at your
authorized service dealer for any scheduled service.
DANGER
The electrical components on this tractor are not
serviceable. Please contact an authorized service dealer
for any service needs.
Have your tractor serviced by qualified service personnel
using only identical replacement parts. This will ensure
that the safety of the tractor is maintained.
NOTE:
At relevant service intervals on
start-up, service minders will be
displayed on the VCM. To clear service
minders press the low drive speed (Turtle) button. (S02) shown
for example.
Prior
to
Use
After
First
Five
Hours
(S01)
Every
Five
Hours
(S02)
Every
10
Hours
(S03)
Every
25
Hours
(S04)
Every
50
Hours
(S05)
Every
100
Hours
(S06)
Prior to
Storing
Clean Top and Underside of Deck
P P
Check/Clean Around fuses,
Wiring and Wiring Harnesses
P P
Check/Clean Around
Transmission and Axle
P P
Clean Tractor
P
Lube Front Rims
P P
Lube Pedal Pivot Points,
Parking Brake and Lift Linkage
P P
Check Tire Pressure/Inflate
to Sidewall Specification
P P
Check Deck Level/Pitch/Adjust
as needed
P P
Check Blade(s)/Sharpen or
Replace as Needed
P P P
Charge Battery
P P
Check Safety Interlock System
P
Check Tractor Blade Stop Time
P
Check Blade Mount Bolt Torque
(Tighten to 450-600 in-lbs
(51.9–67.8 N-m))
P P P
Sharpen Blades
P
Check That All Hardware is in
Place and Secure
P P