manualshive.com logo in svg

Cub Cadet RZT 17, Operator'S Manual, Page: 47 / 52

Share
Download
Cub Cadet RZT 17 Operator'S Manual Download Page 47

Document: - page 16 (Black)

Screen angle and frequency: 45.0000, 150.0000

16

SERVICE & STORAGE

PARTIAL LIST OF BRIGGS & STRATTON PARTS

Models 280000, 310000 AVS

E

 series

Extended Life Series

E

 flat air cleaner cartridge 697153

(washable, no pre-cleaner required)

Extended Life Series

E

 Maintenance Kit

5128

. . . . . . . . 

(Includes oil, A/C filter, spark plug, gas additive)

Flat air cleaner cartridge and pre-cleaner kit 

5077

. . . . . 

Flat air cleaner cartridge 

698083

. . . . . . . . . . . . . . . . . . . . 

Flat air cleaner pre-cleaner

697015

. . . . . . . . . . . . . . . . . . 

Maintenance Kit

5127

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

(Includes oil, A/C filter, spark plug, gas additive)

Model 210000 AVS

E

 series

Flat air cleaner cartridge and pre-cleaner kit 

5079

. . . . . 

Flat air cleaner cartridge 

698413

. . . . . . . . . . . . . . . . . . . . 

Flat air cleaner pre-cleaner

697292

. . . . . . . . . . . . . . . . . . 

Maintenance Kit

5126

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

(Includes oil, A/C filter, spark plug, gas additive)

Oval air cleaner cartridge and pre-cleaner kit 

5053

. . . . 

Oval air cleaner cartridge

496894

. . . . . . . . . . . . . . . . . . . . 

Oval air cleaner pre-cleaner

272403

. . . . . . . . . . . . . . . . . . 

High Flow Air Filter (cylinder)

698973

. . . . . . . . . . . . . . . . 

High Flow Air Filter Cleaning Kit

5089D

. . . . . . . . . . . . . . . 

Synthetic Oil (32 oz.)

100074

. . . . . . . . . . . . . . . . . . . . . . . 

Oil (20 oz.)

100005

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Oil (48 oz.)

100028

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Oil filter (3-1/2 in. long)

491056

. . . . . . . . . . . . . . . . . . . . . . 

Oil filter (2-1/4 in. long)

492932

. . . . . . . . . . . . . . . . . . . . . . 

Fuel filter 

298090 -or- 5018

. . . . . . . . . . . . . . . . . . . . . . . . . 

(for engines without fuel pump installed)

Extended Life Series

 fuel filter

695666 -or- 5070

. . . . . . 

(for engines equipped with fuel pump)
Fuel filter 

394358

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

(for engines equipped with fuel pump)

Gas additive

5041

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Resistor spark plug

491055

. . . . . . . . . . . . . . . . . . . . . . . . . 

Long life platinum spark plug

5066

. . . . . . . . . . . . . . . . . . . 

(used on most OHV engines)

Spark plug wrench

89838 -or- 5023

. . . . . . . . . . . . . . . . . . . 

Spark tester

19368

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Oil pump kit

5056

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

(uses standard electric drill to remove oil from engine quickly)

SERVICE

See an Authorized Briggs & Stratton Service Dealer. Each

one carries a stock of Genuine Briggs & Stratton Parts and

is equipped with special service tools. Trained mechanics

assure expert repair service on all Briggs & Stratton

engines. Only dealers advertising as “Authorized Briggs &

Stratton” are required to meet Briggs & Stratton standards.
When you purchase equipment powered by a

Briggs & Stratton engine, you are assured of

highly skilled, reliable service at more than

30,000 Authorized Service Dealers

worldwide, including more than 5,000 Master

Service Technicians. Look for these signs

wherever Briggs & Stratton service is offered.

You may locate your nearest Authorized Briggs & Stratton

Service Dealer in our dealer locator map on our web site

 

 or in the “Yellow Pages

”

directory under “Engines, Gasoline” or “Gasoline

Engines,” or “Lawn Mowers” or similar category.

Note:

 Walking fingers logo and “Yellow Pages” are regis-

tered trademarks in various jurisdictions.

An illustrated shop manual includes

common specifications and detailed

information covering adjustment,

tune-up and repair of Briggs & Strat-

ton single cylinder, OHV, 4 cycle

engines. It is available for purchase

from an Authorized Briggs & Stratton

Service Dealer or you can order it

from the factory. Write:

Briggs & Stratton Corporation

Attn: Service Division

P. O. Box 1144

Milwaukee, WI 53201

Part No. 272147

STORAGE

Engines stored over 30 days need special attention.

[1] To prevent gum from forming in fuel system or on

essential carburetor parts:

a) if fuel tank contains oxygenated or reformulated

gasoline (gasoline blended with an alcohol or an

ether), run engine until it stops from lack of fuel, 

or 

b) if

fuel tank contains gasoline, either run engine until it

stops from lack of fuel, or add a gasoline additive to the

gas in the tank. (See parts list. Single – use pouches of

gas additive are available from your service dealer.) If

you use a gas additive, run the engine for several

minutes to circulate the additive through the carburetor.

Then, engine and fuel can be stored up to 24 months.

[2] While engine is still warm, change oil.

[3] Remove spark plug and pour about 1 oz. (30 ml) of

engine oil into cylinder. Replace spark plug and crank

slowly to distribute oil.

[4] Clean engine of surface debris, chaff or grass.

WARNING

[5]

Store in a clean, dry area.

Do not store in same area

as a stove, furnace, water

heater, or other appliance

that uses a pilot light or

has a device that can

create a spark.

Summary of Contents for RZT 17





















































Reviews:

No comments