23
Gateway(config-port-forwarding-
No.)# no client-ip
Clear the IP address of the server on the
private network.
Gateway(config-port-forwarding-
No.)# no local-port
Return local port to default value 1.
Gateway(config-port-forwarding-
No.)# no public-port
Return public port to default value 1.
Gateway(config-port-forwarding-
No.)# no protocol
Return protocol to default value
“Both”.
Show Command
Gateway(config)# show
applications port-forwarding
Shows the status of port forwarding.
Gateway(config-port-forwarding-
No.)# show
Shows the current status of the rule.
2.5.5 Interface Command
Use
“interface” command to set up configurations of several discontinuous ports or a range of
ports.
1. Entering interface numbers.
Command
Parameter Description
Gateway(config)# interface lan
[port_list]
[port_list]
Enter several lan port numbers separated
by commas or a range of port numbers.
For example: 1,3 or 2-4
Gateway(config)# interface wan
[port_list]
[port_list]
Enter several wan port numbers
separated by commas or a range of port
numbers.
Gateway(config)# interface
wlan1
Enter WiFi 5G interface.
Gateway(config)# interface
wlan2
Enter WiFi 2.4G interface.
Note : You need to enter interface numbers first before issuing below 2-15 commands.
2. Enable port auto-negotiation.
Command
Parameter Description
Gateway(config-net-PORT-
PORT)# auto-negotiation
Set the selected interfaces
’ to auto-
negotiation. When auto-negotiation is
enabled, speed configuration will be
ignored.
No command
Gateway(config-net-PORT-
PORT)# no auto-negotiation
Set auto-negotiation setting to the default
setting.
3. Enable port auto-negotiation.
Command
Parameter
Description
