CTP Systems CTPhone 1900, Applications Manual

Page: 26 / 132

Low Battery Alert
The CTPhone handset displays a low battery message and beeps when
you are about to lose a call due to low battery. After the first low battery
warning beep, another beep occurs after 60 seconds and then every 30
seconds thereafter until the handset display goes blank. The beep occurs
every 60 seconds when the handset is in standby mode.
Multiple System Access
The CTPhone handset holds up to eight system IDs. Multiple system IDs
allow a single handset to be used in up to eight different CTPhone 1900
systems. Each system must have the appropriate configuration when this
option is used.
Speed Dial
The CTPhone handset stores up to 70 speed dial numbers. To dial a
speed dial number, users can:
• press and hold 0–9 for frequently dialed numbers
• dial a two-digit memory location
• scroll through memory locations
• enter a name stored with a speed dial number
The handset assists a user though the process of storing, editing, and
deleting speed dial numbers by displaying prompts in the handset display.
Instructions for dialing and storing speed dial numbers are in the CTPhone
Handset User Guide.
Volume Control
Volume keys on the handset allow users to adjust speaker volume up or
down while in conversation.
Low Power Consumption
The CTPhone handset supports 4 hours of talk time and 40 hours of
standby time (on and available for calls) on a fully charged battery.