EN • 13
EN
STEP 8 PULSE
Maintaining the battery at 95–100% capacity. The charger
monitors the battery voltage and gives a pulse when neces-
sary to keep the battery fully charged.
LIMITED WARRANTY
CTEK SWEDEN AB, issues this limited warranty to the original
purchaser of this product. This limited warranty is not trans-
ferable. The warranty applies to manufacturing faults and
material defects for 5 years from the date of purchase. The
customer must return the product together with the receipt
of purchase to the point of purchase. This warranty is void
if the battery charger has been opened, handled carelessly
or repaired by anyone other than CTEK SWEDEN AB or its
authorised representatives. One of the screw holes in the bot-
tom of the charger is sealed. Removing or damaging the seal
will void the warranty. CTEK SWEDEN AB makes no warranty
other than this limited warranty and is not liable for any other
costs other than those mentioned above, i.e. no consequential
damages. Moreover, CTEK SWEDEN AB is not obligated to
any other warranty other than this warranty.
STEP 1 DESULPHATION
Detects sulphated batteries. Pulsing current and voltage,
removes sulphate from the lead plates of the battery restor-
ing the battery capacity.
STEP 2 SOFT START
Tests if the battery can accept charge. This step prevents
that charging proceeds with a defect battery.
STEP 3 BULK
Charging with maximum current until approximately 80%
battery capacity.
STEP 4 ABSORPTION
Charging with declining current to maximize up to 100%
battery capacity.
STEP 5 ANALYSE
Tests if the battery can hold charge. Batteries that cannot
hold charge may need to be replaced.
STEP 6 RECOND
Choose the Recond option to add the Recond step to the
charging process. During the Recond step voltage increases
to create controlled gassing in the battery. Gassing mixes
the battery acid and gives back energy to the battery.
STEP 7 FLOAT
Maintaining the battery voltage at maximum level by pro-
viding a constant voltage charge.
20018878A MUS 4.3 Polar, Manual, Print file_001.indd 13
2013-01-15 16:29:20
