Installation manual CHARGESTORM® Connected
page
12
Schuko
1 pc Schuko-outlet CEE 7/3 (on some models)
Display
LED-light symbols
Lock
Mechanical lock with key.
Energy meter
MID-approved energy meter. (on some models)
RFID
Mifare Classic RFID-reader. Frequency 13.56MHz, Magnetic
field +42 dBµA/m (ETSI EN 300 330 V2.1.1)
3G Option
Frequency band: 800/850/900/1700/1800/1900/2100 MHz
Power class 3: +24 dBm, Power class 4: +21 dBm (EN 301 908-2 v11.1.1)
Compatibility
Standards
IEC 61851-1, IEC 62192-2, IEC 61439-1:2011
Approval
CE. Declaration of Conformity can be downloaded from
Safety
Ground fault
detector
Model dependent. Ground fault detector of type and DC-detector.
8
Installation and maintenance tests
Preventive maintenance of CHARGESTORM® Connected shall be conducted at least once per year.
At installation and maintenance of CHARGESTORM® Connected shall the following tests be
performed.
Test:
✓
Trip ground circuit breaker. Use test button on breaker.
✓
Control power cables (and re-tighten cables when needed).
✓
Control that charging outlet /cable is in good condition. Replace otherwise.
✓
Check gaskets. Remove dirt if needed
✓
Charge a vehicle. Check current and that charging symbols on display are working.
✓
Update software if needed
✓
Control network access to back end (in case CHARGESTORM® Connected is connected)
9
Recycling
CHARGESTORM® Connected contains electronics and shall be recycled. You can send back
CHARGESTORM® Connected to CTEK E-Mobility Center and we will take care of the recycling.
Alternatively, follow your local guide for recycling of electronics.
10
Warranty
Warranty period for CHARGESTORM® Connected is 1 year from delivery to customer.
