8
Aerial work platform
B-LIFT 18 HV
COD. UM0287_GB | REV. 0.0 | ED: 09/18
GB
Chapter 4
CONTROLS
4.5
Control panel in the work platform
1
2
3
4
6
7
8
9
10
5
11
Fig.
4.7
Item
Description
1
Turret right-left
rotation
Three position spring-return to centre selector switch.
•
Keep the selector in the up position to rotate the turret to
the right.
•
Keep the selector in the down position to rotate the turret
to the right.
2
Raise
- lower main
boom
Three position spring-return to centre selector switch.
•
Keep the selector in the up position to raise the main boom.
•
Keep the selector in the down position to lower the main
boom.
3
Telescopic
element
extension-
retraction
Three position spring-return to centre selector switch.
•
Keep the selector in the up position to extend the telescopic
element.
•
Keep the selector in the down position to retract the
telescopic element.
4
Platform right-
left rotation
Three position spring-return to centre selector switch.
•
Keep the selector in the up position to rotate the platform
to the right.
•
Keep the selector in the down position to rotate the platform
to the left.
5
Chain status
The light comes on when there is a problem with the chains.
6
Moment
limiter
alarm
The warning light comes on and an audible alarm sounds, which
lasts a few seconds, indicating that the machine is in a locked
condition.
