Chapter 4. Web Configuration & Operation
209
CHAPTER 4
WEB OPERATION & CONFIGURATION
Disabled:
Disables the switch port operation.
Twin Rate Fiber:
When this option is selected, the device will automatically detect the slide-in SFP transceiver’s
speed and choose the most appropriate speed (either 100M or 1000M) for this port.
Auto:
Port auto negotiating speed with the link partner, selecting the highest speed that is compatible with the
link partner.
100Mbps FDX:
Forces the port to 100Mbps full duplex mode.
1Gbps FDX:
Forces the port to 1Gbps full duplex mode.
10Gbps FDX:
Forces the fiber port to 10Gbps full duplex mode.
Auto Media Select (AMS)
is used for dual media ports (ports supporting both copper and fiber SFP cables). AMS
automatically determines if a SFP or copper cable is inserted and switches to the corresponding media. If both
SFP and copper cables are inserted, the port will select the preferred media.
SFP_Auto_AMS:
Automatically determines the speed of the SFP. Note: There is no standardized way to do SFP
auto detect, so here it is done by reading the SFP rom. Due to the missing standardized way of doing SFP auto
detect some SFPs might not be detectable. The port is set in AMS mode with SFP preferred.
100-FX_AMS:
Port in AMS mode with SFP preferred. SFP port in 100-FX speed. Copper port in Auto mode.
1000-X_AMS
: Port in AMS mode with SFP preferred. SFP port in 1000-X speed. Copper port in Auto mode.
100-FX:
SFP port in 100-FX speed. Copper port is disabled
1000-X:
SFP port in 1000-X speed. Copper port is disabled.
Maximum Frame Size:
Enter the maximum frame size allowed for the switch port, including FCS. This switch supports
up to 10056 byte packets.
Alias Name:
Specify an alternate and descriptive name for a given port. By convention, this is the node's fully-qualified
domain name. A domain name is a text string drawn from the alphabet (A-Z; a-z), digits (0-9), minus sign (-). No space
characters are permitted as part of a name. The allowed string length is 0 to 40.
Excessive Collision Mode:
This setting configures the port transmit collision behavior to either "Discard" (Discard
frame after 16 collisions - default) or to "Restart" (Restart backoff algorithm after 16 collisions).
4.3.3 DHCP
The configurations under the "DHCP" menu include DHCP Server, DHCP Snooping and DHCP Relay.
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
