118
CHAPTER 3
INTRODUCTION TO CLI
Example:
Send error messages to log server.
Show:
# show logging
# show logging <logging_id: 1-4294967295>
# show logging [info] [warning] [error]
3.9.28 (config)# loop-protect
3.9.28.1 (config)# loop-protect
Syntax:
(config)# loop-protect
Explanation:
Enable loop protection function.
Example:
Enable loop protection function.
Negation:
(config)# no loop-protect
Show: #
show loop-protect [ interface ( <port_type> [ <plist> ] ) ]
3.9.28.2 (config)# loop-protect shutdown-time
Syntax:
(config)# loop-protect shutdown-time <t>
Explanation:
Configure the period for which a port will be kept disabled.
Parameters:
<t: 0-604800>:
Specify a shutdown time value. The valid values are from 0 to 604800 seconds. 0 means that a
port is kept disabled until next device restart.
Example:
Set the shutdown time value to 180 seconds.
Negation:
(config)# no loop-protect shutdown-time
Show: #
show loop-protect [ interface ( <port_type> [ <plist> ] ) ]
# config t
(config)# loop-protect shutdown-time 180
# config t
(config)# loop-protect
# config t
(config)# logging level error
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
