107
CHAPTER 3
INTRODUCTION TO CLI
3.9.25.10 (config-line)# length
Syntax:
(config-line)# length <length>
Explanation:
Configure the number of lines displayed on the screen.
Parameters:
<length>: Specify the number of lines displayed on the screen. The allowed range is 3 to 512. Specify “0” for no
pausing.
Example:
Display 20 lines on the screen.
Negation:
(config-line)# no length
Show:
> show line [ alive ]
# show line [ alive ]
3.9.25.11 (config-line)# location
Syntax:
(config-line)# location <location>
Explanation:
Configure the descriptive location of this device.
Parameters:
<location>: Location description for the terminal. The characters allowed are 32.
Example:
Configure the location “cabinet5a”.
Negation:
(config-line)# no location
Show:
> show line [ alive ]
# show line [ alive ]
3.9.25.12 (config-line)# motd-banner
Syntax:
(config-line)# motd-banner
Explanation:
Enable the display of motd (message of the day) banner.
# config t
(config)# line console 0
(config-line)# location cabinet5a
(config-line)#
# config t
(config)# line console 0
(config-line)# length 20
(config-line)#
Summary of Contents for MSW-4424C Series
Page 1: ...1 MSW 4424C MSW 4424CS L2 Gigabit Carrier Ethernet Switch ...
Page 382: ......
