55
CHAPTER 3
CLI CONFIGURATION
Show:
# show clock
# show clock detail
3.9.7 (config)# default access-list rate-limiter
Syntax:
(config)# default access-list rate-limiter [ <rate_limiter_list> ]
Explanation:
To default the specified rate-limiter ID.
Parameters:
[ <rate_limiter_list: 1-16> ]: Specify a rate limiter ID.
Example:
To default rate-limiter 1.
3.9.8 (config)# dot1x
3.9.8.1 (config)# dot1x system-auth-control
Syntax:
(config)# dot1x system-auth-control
Explanation:
To enable 802.1x service.
Example:
Enable 802.1x service.
Negation:
(config)# no dot1x system-auth-control
Show:
> show dot1x status [ interface ( <port_type> [ <v_port_type_list> ] ) ] [ brief ]
# show dot1x status [ interface ( <port_type> [ <v_port_type_list> ] ) ] [ brief ]
3.9.8.2 (config)# dot1x re-authentication
Syntax:
(config)# dot1x re-authentication
Explanation:
Set clients to be re-authenticated after an interval set in "Re-authenticate" field. Re-autentication can be
used to detect if a new device is attached to a switch port.
Example:
Enable re-authentication function.
# config t
(config)# default access-list rate-limiter 1
# config t
(config)# dot1x system-auth-control
Summary of Contents for IFS-1604GSM Series
Page 385: ......
