153
CHAPTER 3
CLI CONFIGURATION
3.9.37.8 (config)# qos storm
Syntax:
(config)# qos storm { unicast | multicast | broadcast } { { <rate> [ kfps ] } | { 1024 kfps } }
Explanation:
Configure broadcast storm control rate for QoS
Parameters:
{ unicast | multicast | broadcast }: Specify the storm type that you want to configure.
{ { <rate> [ kfps ] } | { 1024 kfps } }: User-define storm frame rate or set storm rate to 1024 kfps.
Example:
The following example sets broadcast storm control for QoS to 1024 kfps.
Negation
: (config)# no qos storm { unicast | multicast | broadcast }
Show:
# show qos storm
3.9.37.9 (config-if)# qos cos
Syntax:
(config-if)# qos cos <cos>
Explanation:
Configure CoS value on this selecte infterface.
Parameters:
<cos>: Specify COS value (1-7).
Negation
: (config-if)# no qos cos
Show:
# show qos
# show qos [ { interface [ ( <port_type> [ <port> ] ) ] } | wred | { maps [ dscp-cos ] [ dscp-ingress-translation ]
[ dscp-classify ] [ cos-dscp ] [ dscp-egress-translation ] } | storm | { qce [ <qce> ] } ]
3.9.37.10 (config-if)# qos dei
Syntax:
(config-if)# qos dei <dei>
Explanation:
Configure DEI (Drop Eligible Indicator) value on this selecte infterface.
Parameters:
<dei>: Specify DEI for untagged frames.
Negation
: (config-if)# no qos dei
Show:
# show qos
# config t
(config)#
qos storm broadcast 1024 kfps
Summary of Contents for IFS-1604GSM Series
Page 385: ......
