140
CHAPTER 3
CLI CONFIGURATION
Parameters:
<clockinst: 0-3>: Specify the instance number.
<domain: 0-127>: Specify clock domain for PTP.
Negation:
(config)# no ptp <clockinst> domain
Show:
# show ptp <clockinst> local-clock
3.9.35.2 (config)# ptp <clockinst> filter
Syntax:
(config)# ptp <clockinst> filter [ delay <delay> ] [ period <period> ] [ dist <dist> ]
Explanation:
Configure the clock filter for PTP.
Parameters:
<clockinst: 0-3>: Specify the instance number.
[ delay <delay: 0-6> ]: Set delay parameter.
[ period <period: 1-10000> ]: Specify measurement period in number of sync events. The valid value is from 1 to
10000.
Negation:
(config)# no ptp <clockinst> filter
Show:
> show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
# show ptp <clockinst> { default | current | parent | time-property | filter | uni | slave | { { port-state | port-ds }
[ interface ( <port_type> [ <v_port_type_list> ] ) ] } }
3.9.35.3 (config)# ptp <clockinst> mode
Syntax:
(config)# ptp <clockinst> mode { boundary | e2etransparent | p2ptransparent | master | slave } [ onestep |
twostep ] [ ethernet | ip4multi | ip4unicast ] [ oneway | twoway ] [ id <v_clock_id> ] [ vid <vid> [ <prio> ] [ tag ] ]
Explanation:
Configure details of a PTP clock instance.
Parameters:
<clockinst: 0-3>: Specify the instance number.
{ boundary | e2etransparent | p2ptransparent | master | slave }: Indicate the mode of the clock instance. There
are five device modes, these are: boundary, End-to-end transparent clock, Peer-to-peer transparent clock, master
only clock, slave only clock.
[ onestep | twostep ]: Onestep or twostep mode.
[ ethernet | ip4multi | ip4unicast ]: Specify transport protocol used by the PTP protocol engine. There are three
options available, these are: Etherent PTP over Ethernet Multicast, PTP over IPv4 Multicast, PTP over IPv4 Unicast.
NOTE: IPv4 unicast protocol only works in Master Only and Slave Only clocks
[ oneway | twoway ]: Specify one-way or two-way measurement is used.
Summary of Contents for IFS-1604GSM Series
Page 385: ......