130
CHAPTER 3
CLI CONFIGURATION
Show:
> show mvr [ vlan <v_vlan_list> | name <mvr_name> ] [ group-database [ interface ( <port_type>
[ <v_port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
# show mvr [ vlan <v_vlan_list> | name <mvr_name> ] [ group-database [ interface ( <port_type>
[ <v_port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
3.9.31.6 (config)# mvr name <mvr_name> last-member-query-interval
Syntax:
(config)# mvr name <mvr_name> last-member-query-interval <ipmc_lmqi>
Explanation:
Configure the maximum time to wait for IGMP/MLD report memberships on a receiver port before
removing the port from multicast group membership.
Parameters:
<mvr_name>: Specify a name for this MVR entry. The allowed characters are 16.
<ipmc_lmqi>: Specify the LMQI (Last Member Query Interval) value. By default, LMQI is set to 5 tenths of a
second (0.5 second). The allowed range is from 0 to 31744 tenths of a second.
Example:
Set LMQI value to 600 tenths of a second.
Negation
: (config)# no mvr vlan <mvr_name> last-member-query-interval
Show:
> show mvr [ vlan <v_vlan_list> | name <mvr_name> ] [ group-database [ interface ( <port_type>
[ <v_port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
# show mvr [ vlan <v_vlan_list> | name <mvr_name> ] [ group-database [ interface ( <port_type>
[ <v_port_type_list> ] ) ] [ sfm-information ] ] [ detail ]
3.9.31.7 (config)# mvr name <mvr_name> mode
Syntax:
(config)# mvr name <mvr_name> mode { dynamic | compatible }
Explanation:
Configure MVR mode.
Parameters:
<mvr_name>: Specify a name for this MVR entry. The allowed characters are 16.
{ dynamic | compatible }: Specify one of the options.
Dynamic:
MVR allows dynamic MVR membership reports on source ports. (This is the default mode.)
Compatible:
MVR membership reports are forbidden on source ports.
Example:
Set MVR mode to dynamic.
# config t
(config)# mvr name video1 mode dynamic
# config t
(config)# mvr name video1 last-member-query-interval 600
Summary of Contents for IFS-1604GSM Series
Page 385: ......
