24+2G Web Smart-switch User Manual
Revision 1.0-
7
2.
Getting Start
2.1.
Connecting to the Switch Console Port
l
Users can use a RS-232 non-crossover serial cable to connect the PC’S COM port to the switch
console port.
l
The switch system provides the RS-232 interface with baud rate 9600-8-n-1.
l
Use terminal emulation program ( e.g. Windows HyperTerminal, NetTerm) to configure the
switch system.
Notice: When using HyperTerminal with Microsoft Windows 2000, ensure that you have
Windows 2000 Service Pack 2 or later version was installed. With Windows Service Pack 2, the
arrow keys function properly in HyperTerminal’s VT100 emulation.
2.2.
PC COM Port Setting
l
Baud rate= 9600
l
Data bits= 8
l
Parity= None
l
Stop bits= 1
l
Flow control= None
2.3.
Connecting to the Switch Web Port
l
Users can use a CAT-5 cable to connect the PC’s LAN port to one of the switch Ethernet port.
l
Use web browser program (e.g. Internet Explorer, Netscape … ) to configure the switch system.
Switch System
CAT-5 cable
Switch System
