CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
T
+886-2-26591021
F
+886-2-26590237
E
© 2017 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
FMC-1001S
provides a cost-effective solution for Fast and
Gigabit Ethernet fiber media conversion. By utilizing industry
standard SFP modules, this converter can be utilized with multi-
mode or single mode fibers with LC connectors as well as single
fiber (WDM) transceivers. The f i b e r port provides 100/1000M
connection, while the copper UTP port provides 10/100/1000M
auto-negotiation to connect to a wide variety of Ethernet devices.
FMC-1001S gives you the freedom to extend your
10/100/1000M
cabling distance by allowing connectivity up to
120KM over fiber. LED indicators signal the power status, UTP link
& speed and fiber link & speed.
Features
10/100/1000Base-T to 100/1000Base-X SFP Converter
Auto-Negotiation
Auto MDI/MDIX
Forward 2048K bytes (Max.) packets (Switch mode)
Support 9K bytes packets (Converter mode)
Supports Link Fault Pass Through (LFP)
Supports IEEE 802.1Q Tag VLAN pass thru
Supports Q in Q double tagged frame transparent
Provides DIP switch to set functions
Specifications
Electrical Interface
Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab
(1000Base-T)
Speed: 10/100/1000Mbps
Connector Type: 1 x RJ-45 connector
Duplex Mode: Full duplex
Cable Type: Cat. 5, 5e or higher
Quick Installation Guide
FMC-1001S
FMC-1001S-AC
FMC-1001S-DC
10/100/1000Base-T to 100/1000Base-X Fiber Media Converters
Specifications (Cont.)
Optical Interface
Standards: IEEE802.3u (100Base-FX), 802.3z (1000Base-SX/LX)
Connector Type: SFP LC
Data Rate: 100/1000Mbps
Duplex Mode: Full duplex
Fiber: 50/125um (MM), 62.5/125um (MM); 9/125um (SM)
Distance: 2KM (MM), 15/30KM (SM), 20/40KM (WDM)
Wavelength: 1310nm (MM), 1310/1550nm (SM)
1310nm TX/1550nm RX Type A (WDM)
1550nm TX/1310nm RX Type B (WDM)
Power
Adapter Type: Adapter Output 12VDC 0.5A
Built-in AC Power: Input 100
~
240VAC
Built-in DC Power: Input 18
~
60VDC
Consumption: < 3W (SFP not included)
Mechanical
Dimensions: 73.4mm × 108mm × 23mm (Adapter type);
73.4mm × 135mm × 23mm (Power built-in type)
Mounting: Wall mounting (For wall mounting models only)
Weight: 120g (Adapter type); 140g (Power built-in type)
Environment
Operating Temperature: 0°C
~
50°C
Storage Temperature: -10°C
~
70°C
Humidity: 10%
~
90% (Non-condensing)
MTBF (MIL-HDBK-217)
65,000 Hours
Certifications
EMC: FCC Class A, CE
V1.0
- 2 -
- 1 -
www.ctcu.com
