CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
T
+886-2-26591021
F
+886-2-26590237
E
© 2015 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
Introduction
FMC-1000-PH & FMS-1000S-PH
are unmanaged Gigabit PoE
(Power over Ethernet) converters that provide stable and reliable
Fast and Gigabit Ethernet transmission. PoE technology describes
a system to pass electrical power safely, along with data, on
Ethernet cabling. The original IEEE 802.3af-2003 PoE standard
provides up to 15.4W of power to the connected device. The
updated IEEE 802.3at-2009 PoE standard also known as PoE+ or
PoE plus, provides up to 30W of power. FMC-1000S-PH gives you
the freedom to extend your 10/100/1000Mbps cabling distance
by allowing connectivity up to 120KM over fiber. LED indicators
signal the power status, UTP link & speed, fiber link & speed and
PoE status.
Features
Conversion between 10/100/1000Base-T and 1000Base-X or
100/1000Base-X SFP Fiber cable interface
Support IEEE802.3at/af PoE
Support LFPT (Link Fault Pass Through)
Support DIP Switch setting
Support jumbo frame 9K bytes packet
Support wall-mounting installation
Compact size for easy installation
Specifications
Ethernet Interface
Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab
(1000Base-T)
Interface: 1 x RJ-45 (shielded) connector
Speed: 10/100/1000M (Auto)
Optical Interface
Standards: IEEE802.3u (100Base-FX), 802.3z (1000Base-X)
Interface: 1 x fixed fiber (FMC-1000-PH) or 1 x SFP slot (FMC-
1000S-PH)
Speed: 1000M (FMC-1000-PH) or 100/1000M (FMC-1000S-PH)
Quick Installation Guide
FMC-1000-PH
FMC-1000S-PH
10/100/1000Base-T to 1000Base-FX or 100/1000Base-X SFP
with PoE+ (PSE) Fiber Converter
Specifications (Cont.)
Switch Features
Store & Forward Switch mode or Pass Through Converter mode
Packet Size: 9K bytes
Supports IEEE802.3x Flow Control
Auto MDI/MDI-X
Duplex: Full/Half
Power over Ethernet
1 PoE enabled port, End-span, Alternate A Mode
Supports IEEE802.3af 15.4watts PoE per port
Supports IEEE802.3at 30watts PoE+ per port
Positive (VCC+) pins 1,2; Negative (VCC-) pins 3,6
Data: 1, 2, 3, 6, 4, 5, 7, 8
Power
DC Input Power: 48
~
57VDC
Reverse Polarity Protection: Yes
PoE Power Budget: 30W
Consumption:
Model
Power
FMC-1000-PH FMC-1000S-PH
Input Power Consumption
32.3W
31.7W
PoE Power Budget (W)
30W
30W
Mechanical
Dimensions: 108 mm (D) x 74 mm (W) x 23 mm (H)
Mounting: Wall mounting (optional)
Weight: 90g (FMC-1000-PH), 80g (FMC-1000S-PH)
Environmental
Operating Temperature: 0°C
~
50°C
Storage Temperature: -40°C
~
85°C
Humidity: 10%
~
90% (Non-condensing)
MTBF (MIL-HDBK-217)
FMC-1000-PH: 774,378 Hours
FMC-1000S-PH: 749,556 Hours
Certifications
EMC: FCC Class A, CE
V1.0
- 2 -
- 1 -
www.ctcu.com