CTC Union 8309D, User Manual

Page: 23 / 86

22
4.1.3 Initialize
Reboot: Click this bottom to reboot this IP Camera. A confirmation dialogue will
appear and then click “OK” to process. It takes two minutes to reboot this IP Camera.
Factory Default: Click this bottom to reset this IP Camera to the factory default
setting. A confirmation dialogue will appear and then click “OK” to process. The
network indicator on this IP Camera will start to blink. This IP Camera will reboot
automatically after completing adjustments to the default setting. Don't turn off this IP
Camera until the device reboots.
Backup Setting: You can save the setting data of this IP Camera into a file. Click
“Save” and follow the instructions on the browser to save the setting data file to your
specified location.
Restore Setting: Download the saved setting data of this IP Camera. Click
“Browse” and select saved file. Click “OK” and this IP Camera is adjusted according
to the loaded data and then restarted.
Firmware Update: Upgrade the device software. Click “Browse” and select the file
for upgrading. A confirmation dialogue will appear. Click “OK” to start upgrading. This
IP Camera will reboot upon completion.
Note:
Use only upgrade files that are special for this IP Camera. Otherwise problems
may occur. Don't turn off the IP Camera power or disconnect the network until
the upgrading is completed.