CTC Parker Automation PowerStation P1, User Manual, Page: 45 / 86

Address/IRQ Considerations
P1 PowerStation User Guide
37
See Resolving AUTOEXEC.BAT and CONFIG.SYS problems on page
59 if you encounter problems booting up the PowerStation.
Address/IRQ Considerations
As in most ISA-bus computer port addresses, 300 through 32F are avail-
able for adapter functions. Make sure that any expansion cards you install
do not conflict with these addresses.
Important The PowerStation reserves upper memory addresses from C8000 to
CFFFF, while addresses D0000 to EFFFF are available for use by
expansion cards. Be sure to follow these guidelines; address
conflicts may cause improper operation of the PowerStation.
IF EXIST C:\STARTUP\
AUTOEXEC.BAT CALL
C:\STARTUP\AUTOEXEC.BAT Call second AUTOEXEC.BAT file
if contained within a Project
C:\NET\NET.BAT (optional) Load network batch file if unit is
connected to a LAN
C:\CTC\PSU Start the PowerStation Shell
Command line parameters Description
StockCheck.com