CT Lab Vecto III, User Manual

Page: 69 / 80

Vecto III User Manual
69
5.4.5 Disposal
5.4.5.1 EU Countries
The Vecto III is subject to the European Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE) and the corresponding
national legislation. The WEEE Directive outlines the procedure for
handling electrical waste equipment across the EU.
The Vecto III may not be disposed of with normal waste. Should the Vecto III reach its
end of life, the device may be returned to the distributor free of charge. In addition,
CT LAB will accept devices that reached end of life free of charge.
5.4.5.2 Non-EU Countries
The proper disposal of electrical devices prevents the occurrence of any negative
effects on people or the environment, follows the specific procedures for handling
harmful substances and enables valuable raw materials to be recycled. Therefore, it is
recommended that electrical devices are disposed of in a separate, environmentally-
friendly waste collection and not with normal waste. In some cases, national legislation
also stipulates the separate disposal of electric and electronic products. Please ensure
you dispose of electrical devices in accordance with the valid regulations in your
country. CT LAB will accept devices that reached end of life free of charge.
CT LAB will accept devices that reached end of life free of charge
for proper disposal.