HV DTemp Measurement System – Introduction
User Guide
3
Version 0
1
.00 // 2021
1.4 Directive
A directive contains important information about the product described in the guide.
Failure to observe a directive may result in malfunction and/or damage to property and
material. A directive is indicated by the blue symbol
i
and the signal word
NOTE
.
Example
NOTE!
i
This symbol indicates important information.
Failure to observe this information can impair the function or result in
damage to the module.
Read the information carefully.
Symbols used
Symbol
Meaning
i
This symbol indicates important information. Failure to observe this infor-
mation can impair the function or result in damage to the module.
Wear suitable safety gloves.
Disconnect the measurement module before starting work.
Tab. 1-4: Symbols for directives
1.5 Liability disclaimer
This guide and other documents are part of the product and contain important information
for its safe and efficient use. To maintain the high quality level the product is continuously
being developed, which may result in the product's technical details changing at short
notice. As a result, the contents of this documentation may differ from the technical speci-
fications of the product. No claims against the manufacturer can therefore be derived from
the contents of the product documentation.
CSM GmbH is not liable for technical or editorial errors or missing information.
CSM GmbH assumes no liability for damage resulting from improper use of the product and/
or non-observance of the product documentation, in particular the safety instructions.
→
