CSG Security NetVision Plus, User Manual

Page: 65 / 164

21-0400E v2.3.3
Welcome Common
Admin
Config Install Tech-Ref
57
11.1 Video Server Users and
Passwords
Related Topics: 11.2 Remote Users and Permissions
(+ HTTP server port)
11.1.1
Video Server Passwords
Two login names and passwords are initially
provided for logging into the Video Server:
Default Video Server User
Names and Passwords
User name Password (Permissions)
Super -- Access to everything;
PTZ priority
0 (highest).
Operator -- Everything except
configuration tasks
( [Utility] menu, and
Control Panel
Ö
DSR
Config.); Can be
limited to specific
cameras (see next
heading); PTZ priority
1
(2nd highest)
Notes:
Supervisors can also shut down the NetVision
software. For operators, this is configurable. These
passwords do NOT pertain to remote stations.
Locator:
(Logged in at the Video Server as
a "Supervisor"),
Select: [Utility], then [Option Setting].
Select
Password
, and then enter your
desired password (once under "Password",
and again under "Confirm").
Tip:
This helps
to protect against saving an incorrectly typed
password.
When finished, click
[OK]
, and then
[Close]
the utility menu.
11.1.2
Additional Local Users (Local
User Manager)
You can set up additional local users with their
own password if desired. You can also set
whether each new user will be logging in at the
"Super" level, or as an "Operator" (see the
preceding table for permissions).
To set up local users and passwords, open the
Local User Manager, and then refer to the
descriptions that follow while making your
selections.
Locator:
At the Video Server PC (will
prompt for "Supervisor" login),
Select: (Windows task bar) Start, Settings,
Control Panel,
DSR Configuration
.
Desktop Link: There should also be a link to this on
your desktop called "NetVision Configuration".
Tips:
If you cannot access the Windows task bar,
press
Ctrl-Esc
(or your 'Windows' key). To view the
names for items on the task bar, click a blank area on
the bar, and then 'hover' your mouse pointer over each
item.
Logon as a "Supervisor" when prompted.
Then, double-click
Local User Manager
in the
list. When the screen appears, make your
desired selection(s).
11
Tasks Performed at the Video Server Only