CSG Security NetVision Plus, User Manual

Page: 104 / 164

96
NetVision Plus/Elite and Micro DVR v2.3
SP2
User's Guide
21-0400E v2.3.3
Control Panel,
Ö
Windows Firewall,
Ö
Exceptions ,
Ö
[Add Program].
NetVision includes the following software
components that must be allowed to run:
•
DSR HTTPSVR;
•
DSR Relay;
•
MDSERVER;
•
Playback Server;
•
Chat
Server;
•
Audio Server;
•
Digital
Surveillance Recorder.
Note: Installing or upgrading the NetVision software
must be done by someone with NT administrator
authority (i.e., logged in as administrator).
Before you Begin: Refer to the PC requirements
section to determine if your computer will provide
adequate performance.
Related Topics:
19.2 Remote Station PC Requirements
1)
If upgrading from an existing version
of the NetVision software:
Note:
This is a general reference only. For more
information, look for a 'readme' and/or other PDF file(s)
in the "Documents" folder on your NetVision CD.
a)
Make backup copies of any
alarm/video files that you wish to keep
(under C:\DSR-video)
.
b)
Ensure the existing NetVision software
is shut down, and then remove it
(Control
Panel
Ö
"Add/Remove Programs").
2)
Insert the NetVision™ CD and wait
briefly for the installation program to
start. (If it doesn't start automatically,
eject and reinsert the CD.)
3)
Follow any prompts that appear.
Tip:
Say Yes if asked to delete existing
alarm/video files.
4)
Select the type of software to install:
Remote Station: The full-featured multi-camera
remote viewer. Intelligent Remote Module: A
small, single camera viewer.
xx Camera NetVision Server: These selections
pertain to Video Servers only.
5)
Follow any additional prompts that
appear.
Tip: Say Yes if asked to delete
existing alarm/video files.
6)
When finished, put the CD in a safe
place.
Related Topics:
19.2 Remote Station PC Requirements
21 Network and Connectivity Issues
20
Software Installation or Upgrade
20.1 Installing or Upgrading the Remote Station Software