FT750-26 and FT750-20 Owner’s Manual
16
these adjustments while riding, as doing so may cause you to crash.
Adjusting Your Bicycle to Fit You
Your electric bicycle can be adjusted for fit to your body by making adjustments to seat height, seat
position, seat angle, handlebar angle, and brake lever positions. Your objective should be to adjust the
bicycle such that it fits you comfortably.
Seat fore and aft position can be adjusted by loosening the
clamp beneath the seat and sliding the seat to the front or to
the rear. Most people are comfortable with the seat
approximately centered over the seat post.
Warning!
Make sure the bolt is tight after making any
adjustments. A loose bolt could cause you to crash.
Seat angle can be also adjusted by loosening the bolt beneath
the seat and rotating the seat angle. You should adjust the seat
angle such that the seat is approximately parallel to the
ground. You may wish to make minor angular adjustments to
move the front of the seat up or down to suit your
preferences.
Warning!
Make sure the bolt is tight after making any
adjustments. A loose bolt could cause you to crash.
Seat height can be adjusted by loosening the seat post clamp
and moving the seat post up or down in the frame. You should
adjust the seat height such that when the pedal is at its lowest
position, your knee is very slightly bent. The seat should be
pointed forward, without the nose of the seat biased to the
left or the right.
Warning!
Never adjust the seat height so high such that the
seat post is extended beyond the warning line inscribed on the
seat post. This can result in the seat post failing.
