CS36T Owner’s Manual
Page 19
8
Through Hull and Deck Fittings
8.1
How to Install Through Hull Fittings
1.
Consult with your local marine dealer for correct positioning of the through hull.
2.
Drill a hole to accommodate the size of the through hull fitting.
3.
For strength purposes, provide a small back-up plate, such as marine plywood with the same
hole diameter. Line up the holes and embed the back-up plate in sealer, allow to dry and glass
into place using mat and resin.
4.
Install through hull fitting.
8.2
How to Install Deck Fittings
1.
Ensure that deck reinforcement is provided where additional winches are to be located such as
winch island mounts.
2.
The cabin ceiling panels are removable and access holes to be drilled through the wood panel
ceiling for access to bolts securing the winch.
3.
Winches usually do not require back-up plates but flat washers, lock washers and nuts are
required. All penetrating bolts for winches, tracks and cleats should be embedded with silicone
sealant.
4.
All deck fittings which are under load, such as, chain plates and inboard genoa tracks, should be
checked annually for leaks and resealed with marine sealant if leaks are detected.
