Operation
LD 450 V1.00
Seite
14
von
23
11.3.3
System settings
11.3.3.1
System update
If required, there is the possibility for the LD 450 to download a firmware update to the
device via the USB stick. The latest software is available on the CS Instruments GmbH
homepage
The received file must then be stored on the USB stick and transferred to your device as
described below.
Settings
➔
System
➔
System-Update
P1: V033
C1
I1
Update Kanäle
11.3.3.1.1
Check for Updates
Home
➔
Settings
➔
Device settings
➔
System-Update
➔
check USB-Stick for new Updates
P1: V033
C1
I1
Update Kanäle
If it is required to install an older software version, you have press the button
„Force all“
Overview of
System-Update
-Functions.
f after pressing the button
“Check USB Stick
for
new Software updates”
the following
messages appear in the window, is the LD
450 is not properly connected to the USB
flash drive or there are no files available.
I If the LD 450 is correctly connected to the
USB stick and there are new versions of the
individual SW Parts, the new versions are
marked in red.
The update is started by pressing the
„
Update selections
“
button.
