Crystal Vision
Rear modules and signal I/O
3.2 Rear module connections with VR12
The VR12 single-slot rear module has one
3G/HD/SD serial digital video input plus two
3G/HD/SD serial digital video outputs on
BNC and eight AES stereo pairs or eight
mono analogue channels as balanced I/O
on the D-Type connector. The dual fibre I/O
can be configured as a video input, a video
output or a video input and output
depending on the fibre modules fitted to the
SYNNER-VF card.
The 26-way high-density audio ‘D’ socket
on the VR12
module can be used for
analogue or digital, inputs or outputs – or a
mixture of both depending on the I/O
piggybacks fitted. Half of the I/O channels
on the rear module are connected to the
front I/O (nearest handle) piggyback
position and the remainder to the rear. The
DIOP4 will normally be configured as 110
ohm balanced operation when using this
rear module.
Up to 20 VR12 rear modules can fit into a
Vision 3 frame.
VR12
3G/HD/SD serial
digital input
3G/HD/SD serial
digital outputs
Dual fibre video
I/O. Correct fibre
module must be
fitted to card
Balanced AES or
analogue audio
I/O
SYNNER-VF User Manual R1.1
12
03 January 2017
