Crystal Vision
Control Descriptions
6 Control Descriptions
The controls of ViViD 3GT-20 are accessible from the front panel, the board edge or
from Crystal Vision’s VisionWeb software. The description of controls used in this
manual is based on VisionWeb GUI screen grabs but the path to locate controls via the
front panel or board edge follows the same logic. For instance, in the VisionWeb GUI
the ‘Input Frozen’ control is located in the ‘
Video Status’
group of the ‘
Status’
menu.
To find the same control using the card edge or front panel follow the path
Status->Vid
Status
to the
Ip Frozen
control.
VisionWeb GUI controls are accessed by menus at the bottom of the page which, when
selected, offer sub-menus containing a number of controls. Some controls are
simulated LEDs that are used to show status, others are check boxes, buttons or
sliders which change various ViViD 3GT-20 settings.
The description of the menus are in the order shown in the GUI i.e.
VIDEO STATUS, AUDIO STATUS, TIMECODE STATUS, VIDEO DELAY, TIMECODE
DELAY, OUTPUT CONFIGURE, RGB PROC AMP, YUV PROC AMP, FIBRE INPUT
ENABLE, PRESETS, GPO ALARMS, ALARM DELAY TIME.
Each tab is shown with a screen grab and description of each control’s function:
ViViD 3GT-20 User Manual R1.1
20
20 January 2021